It is now ten months that we have had to present ourselves as virtual beings! All too soon it will be a full year and still doubtful that we will be able to meet in person. At least our 'lockdown' Zoom meetings have allowed us to keep in touch, and have even shown some modelling advances during this period!
2020-21 would to have seen Lightermans Yard at a number of exhibitions and shows. We tend to be rather happy when we have the layout running for the public and overhear visitor's and other exhibitors, generally enthusiastic, comments. It will be good to get back on the circuit.
Alan Smith; Clas31
This is the new release model from Farish it has been updated to take sound and there are sound fitted versions available. It was bought to our attention that the 2SA replacement wheelsets did not fit.
Upon inspection it was found the Farish have changed the gears on the driven axles. the originals being 16T and the new ones 14T. Unfortunately 14T axles were not available from the shop so I got together the necessary parts from our in house manufacturers and assembled some. This proved to work out OK and the loco now runs as quietly and smoothly as original.
If anybody needs to do this re wheeling exercise the parts, ie complete axle sets will be available from shop 3 shortly.
The photos of Evercreach Junction (below) show progress with boards 1 and 2. Keith and I decided to make the crossover with fabricated crossings, this meant I needed to introduce some PCB sleepers in the formation to allow for electrical connections. this is also useful for anchoring the rails longitudinally. A lot was learned from this approach and on the next board I shall be building directly over the plan which will be glued down onto the cork subbase. This will save the issue of parts moving in the transfer between build board and layout. Brass sleeper sections have been used at board joints these are soldered directly to both 12BA and 8BA brass screws tapped directly into the ply baseboard deck. This makes for a really secure fixing at track ends the rail also being soldered to the chairs. The 8BA screws go all the way through the boards enabling electrical feeds to be secured to them.
Pete Townsend; More from Leigham Road
Richard Doust; Minor developments on the shipyard project, buildings and background.
No comments:
Post a Comment