Saturday 27 March 2021

March 2021 Meeting

It's almost a year since we found ourselves in Covid lockdown and unable to meet face-to-face. At the time we probably didn't think we would be in the same place a year on. Enter Zoom and other Internet meeting software. Our meetings went online and provided a means of maintaining contact and keeping up to date with our projects.

One of the casualties of maintaining our distance is that the exhibitions and events that we would normally visit or take part in were suddenly canceled or postponed - all that planning etc...

Richard
Lightermans Yard was to have been exhibited at RAILEX this spring. Railex canceled the live exhibition and have invited would be exhibitors to contribute to their alternative web based show. Of course, although well photographed, just as you need video footage all you have are stills! Below is a link to what has been made so far, it needs some more work. There are a couple of corrections to make before we submit the animation
to Railex.
 

To watch the movie in your browser,    https://vimeo.com/522447128   password:  LIk51g

David


 

 

 


The wagon photo is a steel coil conversion of a standard bogie bolster D, this really just involves the addition of two wooden cradles over the bogies, these are made from various scraps of plastic strip rubbed over with course wet and dry paper to give the hint of wood grain, the coils are rolls of paper covered with painted squares of tracing paper to represent the tarpaulin the coils are wrapped in, not entirely happy with them so a bit more to think about the base kit is the usual Stephen Harris etch.
 

The next photo is a bit more of a long term project!



 

 

 
 
Howard

Here is a picture of me scanned by Modelu, and (below) 3 figures - 2mm, 4mm & garden railway scale. "I borrowed a railway cap and waistcoat but forgot to wear a tie!!!"

 

 

 

 

 

 

 

 

 

 

Alan

Photo 1 shows progress on board 2. This is the main station area and goods yard.
I found when laying track on board 1 there was a tendency to move as it was transfered from the building board to the layout. Copies of the plan were glued to the cork base and sleepers and track glued to this to eliminate the problem.


To check clearences of the 3 tracks through the station the platforms were fabricated from ply. The first attempt being cut on the band saw was not up to the job. The platform edge was anything but a smooth curve. Plotting from coordinates into CAD and cutting on CNC was much more successful.

The length of the platforms cut into 4 to fit the machine. Further experiment allowed the ramps at platform ends to be machined also.
Upon fixing stone sheet to platform faces it was noticed from studying photos that the platforms are indeed different in that one has a brick face with stone continuing about half way down the up platform. Some ammendments are to be made and once complete track laying can continue.










Pete Townsend

Most of my progress this last month has not been particularly visible. I have been tidying up the wiring, now that I know that it works correctly. 
One thing I have done is build and fit a couple of working semaphore signals. They are not up to the standard of some of the works of art that I have seen in the 2mm Magazine,  but they work well, servo powered, and look OK to my eyes. I can't show you a video of them working at the moment as I've got bits of the electrics disconnected to fit some sensors in the engine shed to stop me hitting the back wall with my locos.

 

 

Additional notes; Howard mentioned Posca pens for fine detailing, in this context - figures. They are available in "extra fine" with a 0.7mm tip. He bought his from Hobbycraft, (although currently out of stock).
They are currently on special offer here;


The Lifecolor acrylic paint sets are available from here and here; The most useful for us are "Dust and Rust", "Flesh Paint", "Weathered Wood", "Rail Weathering", "Shades of Black"
David mentioned Molotow pens with an even finer point.

Howard also showed a novel cut out and locomotive personalised birthday card


 

 Next meeting Sunday 11 April 2021 13.00






1 comment:

  1. Feel free to grab some of my video from a few years ago to edit in to your video. There is about 3 minutes worth towards the end of this video:

    https://www.youtube.com/watch?v=v0sCqQorS8M

    Ian.

    ReplyDelete